mykrowyre
Experienced Member
I recently built an XT-IDE kit V4 from glitchworks... the EPROM did not appear to be programmed so I burned v 1.1.5 of the Universal XT-IDE bios (XT version).
I've tried various dip switch combinations and the closest I've gotten is I see the following when I boot with no harddrives attached:
ROM D000
ERROR PRESS [F1] TO CONTINUE
I figured I should see some sort of Bios message from the XT-IDE telling me no drives are attached.
Anyone have any ideas? I can't seem to find any instructions for the board, or the dip switch positions.
Thanks
I've tried various dip switch combinations and the closest I've gotten is I see the following when I boot with no harddrives attached:
ROM D000
ERROR PRESS [F1] TO CONTINUE
I figured I should see some sort of Bios message from the XT-IDE telling me no drives are attached.
Anyone have any ideas? I can't seem to find any instructions for the board, or the dip switch positions.
Thanks