Lorne
Veteran Member
I'm trying to find the DIP switch settings for an AST MegaPlusII card.
"The Ref" lists the card, but there are no switch settings identified.
I've searched a few other places and can't even find mention of this card.
Here's a photo of it:
In addition, it has a triangular AST card mounted on it which connects to the 62 pin connector:
This triangular card had a cable running from it, to the 15 pin connector at the top left of the AST ConnectALL. The ConnectALL is an interesting (in that I haven't a clue what it does) little add on. The two screw holes on the left side mount under the screws holding the right side of a 5150 PSU in place, and the cables poke through one of the holes on the back of the 5150.
Edit: the larger connector on the ConnectALL comes from J2 (the parallel port) so that's going to be for a printer. What I don't know is what the triangular card, and the other connector is for. And what's with all the other slots for other connectors? Future expansion?
"The Ref" lists the card, but there are no switch settings identified.
I've searched a few other places and can't even find mention of this card.
Here's a photo of it:
In addition, it has a triangular AST card mounted on it which connects to the 62 pin connector:
This triangular card had a cable running from it, to the 15 pin connector at the top left of the AST ConnectALL. The ConnectALL is an interesting (in that I haven't a clue what it does) little add on. The two screw holes on the left side mount under the screws holding the right side of a 5150 PSU in place, and the cables poke through one of the holes on the back of the 5150.
Edit: the larger connector on the ConnectALL comes from J2 (the parallel port) so that's going to be for a printer. What I don't know is what the triangular card, and the other connector is for. And what's with all the other slots for other connectors? Future expansion?
Last edited: