Selling a complete working Amstrad PC1512DD system, including color monitor, keyboard, and mouse.
Have pics available here:
Craigslist ad
Looking for cash, or trading for Tandy 1000 related items (specifically an external 5.25" drive or a CM-5 or CM-11 monitor) or PC software from between...
Looking to buy a Tandy 1000 HX floppy drive cable and a floppy drive bay cover. Located in southwestern New Jersey (close to Philadelphia/Wilmington DE). Can pay via Paypal.
Still looking for one of these. Not interested in boards with an IBM 486SLC2 or a non-clock-doubled Cyrix, specifically looking for the CX486SLC2-50 onboard.
Like the title says, looking for a motherboard with a Cyrix (or TI, but not IBM) 486SLC2-50 processor on-board. Preferably on the smaller side. Wouldn't mind one based on a TI SXLC2 processor either but I understand that these are rarer and typically more expensive. The SLC2-50 would be...
I'm looking for a clean dump of a Samsung S330 BIOS ROM. It's an 8088 Faraday FE2010A based XT clone system.
I had uploaded the ROM I have to ultimateretro.net, but it turns out it's a bad dump and I don't trust it and I can't test it anyway because my S330 board is destroyed from corrosion.
Like the title says, looking for a Uniwill 258KA0 which was sold by various OEMs as a white book gaming laptop around late 2004/early 2005. I know I bought my original one from CyberpowerPC as the Xplorer X64-8000 and it was also sold by Fujitsu as the Amilo A1630.
These came with an Athlon 64...
Title. It's a weird type of RAM with a 44-pin connector similar to a 2.5" IDE connector.
I don't know if Epson has a part number for this but I know Kingston made one, part number KEP-500C/4.
Highly interested in buying. PM or e-mail me with offers. Thanks
Originally posted about this laptop here: http://www.vcfed.org/forum/showthread.php?78670-Old-Laptop-PSU-Voltage-Question-(Epson-Actionnote-500c)
I ordered an AC adapter with the proper DC output and sufficient current and I'm waiting for it to come in. In the meantime, I discovered that my...
I picked up a cheap Epson Actionnote 500c on eBay without a PSU. System wants 15.5VDC and 2.4A. Original PSU part number is AP-3S25. Couldn't find an original one anywhere online.
Did some searching for a replacement power supply and all over the internet there was a cheap one listed as a...
Looking for an 8087-1 or similar FPU, DIP40, any type (ceramic/plastic). Going to be pairing it with an NEC V20 clocked at 9.55MHz.
Located in USA (southern New Jersey), looking for USA sellers only. Can pay via PayPal.
Thanks
Selling my Pentium Overdrive 83MHz CPU. Chip is a working pull and is CIB with all original docs, driver disk, and chip puller tool.
Asking $125. Accepting payments via PayPal.
Will even-swap trade for a Cyrix Cx486SRX2-40 clip-on 386-to-486 upgrade chip in similar condition (working, CIB...
I built this PC about 4 years ago. Trying to make some space.
Specs:
Generic beige AT case (very clean)
300w AT PSU (manufacture date 4/2010)
486 motherboard with ISA, PCI & VLB slots & built-in I/O (I forget the make/model. Has American Megatrends BIOS & new CMOS battery)
16mb 72-pin FPM RAM...
Looking for an 8088 motherboard.
The one I'm replacing was somewhat oddly sized; it is roughly 12" x 8" and the case it was designed for is wider than it is deep. There were only 6 8-bit ISA slots to the left of the keyboard port, so a board with any more than that would probably be too long. I...
I have an old Samsung S330 XT clone PC that used to belong to my uncle. He gave it to me around 2000 or 2001, and it's basically sat in a closet at my parents' house since then.
I'm trying to get the system back up and running. It has an Everex EGA card, a floppy controller/IO card, a Western...
Trying to restore an old Samsung XT clone given to me about 15 years ago. The machine still works but the hard drive crapped out years ago. Looking for an MFM/RLL drive at least 20mb in size.
Can pay cash; also have a crapton of vintage hardware I can trade, including:
386DX CPUs (20 and...