Not the same as 30850-00x
Alternatively, if you have a 30850 board with an EPROM which *isn't* labelled "WG.00-924" I may be interested!
This was sold with model 5125EN and 5150EN tape drives.
(Specifically the newer version which supports SCSI tapes)
I can't seem to find this anywhere! Plenty of copies of the OS/2 version, for sale and download, but nothing on the DOS version?
I've found a few examples of physical disks this changing hands, but no-one sharing the love?
Hi Guys
I've been pondering this for a while. These laptops have a 5V TTL floppy connector on the rear, and I'm keen to attach an old Tandon TM100 drive to it.
Has anyone done anything like this? I've not even been able to find a pinout for this connector, or schematics or any other related...
Heya
I've been plagued by connection problems on my PC (Model A) between the power supply and mainboard. From looking at the contacts, they are quite badly corroded. I'd like to replace them, but stuffed if I can figure out what they are!
It is well known that Molex made connectors like this...
Heya folks, just thought I’d share this -
I have an IBM5150 which had an older (5700671) BIOS in it and was quite keen to upgrade to the last (10/27/1982) revision so I could get 640K of RAM working, use a VGA card, and also try out XT-IDE.
But quickly found this physically wasn’t straight...
Hello
Currently running up an IBM 5161 which has an Everex EV-391 a couple of ST-412s
From reading the manual it looks like I will need the above titled software to park/low level format etc
Does anyone have a copy of this? Do I actually need it? Have not even switched on the power yet!
Cheers
Heya folks
I recently came across this most unusual XT clone, apparently a "Kaypro PC", which has its mainboard split across two ISA cards, and via a simple backplane.
I cannot for the life of me find any information on it. Does anyone else have one? A manual? Anything? Really just trying to...
Would certainly be good if you could share that.
It's a work in progress, but I have attached my proposed changes so far. Perhaps you could compare that to your changes?
Heya folks
I live in the UK and I've got a 5150 Model A which has a black 120V PSU. I am quite keen to get it running from 220V without a step-down transformer.
I've spent the last few days studying the schematic and can see that is very likely possible. There very clearly is not any switch...