Elvi
Experienced Member
This thread http://www.vintage-computer.com/vcforum/showthread.php?30209-FTP-s-PC-TPC-for-Dos got me thinking if i were to setup a network on my old samsun spc3000 turbo xt pc and use mTCP, mostly out of curiousity, doubt i've ever been on the net with a dos pc before, nothing i can remember anyway, yeah i've been on the net with a 486 and win3.11 but that's as far as i've been.
Now i don't know what cards there are out there but i have a few but most of them are 16bit isa and i have no idea if any of them have 8bit modes so they could run on the XT then i found this litle thing in my stach http://electricdreams.ath.cx/card/gatewaygethernet.php?current=3&s2=1
problem is i don't know if it works or if there are any drivers for it however i do have a bnc to rj45 adapter and some hubs that can do that if i manage to get it on the network.
anyone have any ideas on these old things OR know of a dos driver for this particular card THAT works on ms-dos 3.3a that i've installed on that pc?
Now i don't know what cards there are out there but i have a few but most of them are 16bit isa and i have no idea if any of them have 8bit modes so they could run on the XT then i found this litle thing in my stach http://electricdreams.ath.cx/card/gatewaygethernet.php?current=3&s2=1
problem is i don't know if it works or if there are any drivers for it however i do have a bnc to rj45 adapter and some hubs that can do that if i manage to get it on the network.
anyone have any ideas on these old things OR know of a dos driver for this particular card THAT works on ms-dos 3.3a that i've installed on that pc?