I'd like to add a reset button to my C64 and assume it is as simple as grounding out the RST pin on the 6510 with a momentary contact switch and filter cap. My questions are
1) is this all there is to it ?
2) I have seen two pinouts for the 6510. One show PIN 40 to be RST (labeled 6510 CPU) and another 2 show PIN 1 to be RST (labeled 6510-1 and 6510-2)
Thank you...
Marc
1) is this all there is to it ?
2) I have seen two pinouts for the 6510. One show PIN 40 to be RST (labeled 6510 CPU) and another 2 show PIN 1 to be RST (labeled 6510-1 and 6510-2)
Thank you...
Marc