Harddrive problems after upgradeing in my home pc
I previously had two hard drives in my computer; a WD 80gb and a Maxtor DiamondMax plus 9, 250gb slave. prior to upgrading, they both worked fine.
I just put all new parts in my computer, including a new motherboard: MSI K8N Neo-F. I didn't touch the hard drives at all in the upgrading process, but the I cannot get the Maxtor to work.
The bios detects the Maxtor, but lists it with a funny name of random characters. The capacity listed was somewhere around 8,026kb. I figured the bios had so I flashed is with a new version. Now the name of the Maxtor in the bios is Laxtfr, or something to that apearence (two characters are wrong) and the capacity shows the same untill I press enter on auto detect; It then shows 111gb or a number just above 100.
At this point the Maxtor was not detected in windows at all, so i disabled it in the bios and that allowed it to be detected by windows computer management. I read somewhere to use the wizard to initialize the drive, but nothing happens when I do that (I havn't tried converting it because what I read said not to do it). The software that comes with the Maxtor allows me to "Set Up" the drive, but I get to a point where it says it is going to partition it and it scares me to continue because I have very important information on the drive that I can't afford to lose.
Any ideas?
the computer as it stands now consists of:
MSI K8N Neo-F motherboard
MSI 6600GT video card
Athlon 64 3000+ 939
WD 80gb HD
Maxtor 250gb HD
Windows XP Pro
I previously had two hard drives in my computer; a WD 80gb and a Maxtor DiamondMax plus 9, 250gb slave. prior to upgrading, they both worked fine.
I just put all new parts in my computer, including a new motherboard: MSI K8N Neo-F. I didn't touch the hard drives at all in the upgrading process, but the I cannot get the Maxtor to work.
The bios detects the Maxtor, but lists it with a funny name of random characters. The capacity listed was somewhere around 8,026kb. I figured the bios had so I flashed is with a new version. Now the name of the Maxtor in the bios is Laxtfr, or something to that apearence (two characters are wrong) and the capacity shows the same untill I press enter on auto detect; It then shows 111gb or a number just above 100.
At this point the Maxtor was not detected in windows at all, so i disabled it in the bios and that allowed it to be detected by windows computer management. I read somewhere to use the wizard to initialize the drive, but nothing happens when I do that (I havn't tried converting it because what I read said not to do it). The software that comes with the Maxtor allows me to "Set Up" the drive, but I get to a point where it says it is going to partition it and it scares me to continue because I have very important information on the drive that I can't afford to lose.
Any ideas?
the computer as it stands now consists of:
MSI K8N Neo-F motherboard
MSI 6600GT video card
Athlon 64 3000+ 939
WD 80gb HD
Maxtor 250gb HD
Windows XP Pro