Chromedome45
Veteran Member
I was wondering if it would be possible to test a Disk ][ drive using an Apple iigs? I was think of opening up the 3.5 or the newer type 5.25 drive and
removing the 19 pin connecter from the internals of the iigs drive and connecting that 19 pin end of the cable to the disk ][ interface board. Then hooking up the 19 pin "D" connector to the iigs. Possible?
Reason: My Apple II+ is still down awaiting a 6502. Which I should have tomorrow. Was just wondering if the drives I got as part of the II+ package are any good. I did open one up and the internals were very clean.
removing the 19 pin connecter from the internals of the iigs drive and connecting that 19 pin end of the cable to the disk ][ interface board. Then hooking up the 19 pin "D" connector to the iigs. Possible?
Reason: My Apple II+ is still down awaiting a 6502. Which I should have tomorrow. Was just wondering if the drives I got as part of the II+ package are any good. I did open one up and the internals were very clean.