Paint evidently was thrown away.
The last meeting before VCFE is the 11th so will attempt to put together enough to make it useful. Manual tells you which oils and greases to use. You'll have 6, some 9, 22, and possibly 23. Probably some DC44med for the friction clutch.
I did dump the entire tilt bed part into a boil tank one time. It was for an 027 (keypunch with Friden adding machine attached) which had accumulated a whole lot of card and carbon dust from punching source document cards (back sheet of 2 part sales tickets from JCPenney stores). I had pulled the major parts, feed unit, punch drive, punch unit, pin sense unit, and stacker off one afternoon, boiled it overnight, and put the thing back together the next day. Think it was the first one that had ever been done in Atlanta. Feeds sure did quieten down from what it had been before. My boss wasn't happy that I took that much time but it was my responsibility and Penney was happy to give it up for a day if I thought it was neccessary.