fachat
Experienced Member
Just in case you haven't seen it, I designed and built the Micro-PET, a Commodore PET re-incarnation: https://github.com/fachat/MicroPET
Have fun!
André
- Commodore 2001 / 3032 / 4032 / 8032 / 8296 with options menu to select at boot
- Boot-menu to select different PET versions to run (BASIC1, 2, and 4)
- 40 col character display
- 80 col character display
- 8296 memory map emulation
- IEEE488 interface (card edge)
- Tape connector (card edge)
- PET graphics keyboard, or alternatively a C64 keyboard (BASIC 4 only)
- Improved system design:
- 1M total RAM: 512k fast RAM, 512k video RAM, all accessible using banks on the W65816 CPU
- boot from an SPI Flash ROM
- up to 12.5 MHz mode (via configuration register)
- VGA b/w video output (640x480@60Hz mode)
- Write protection for the PET ROMs once copied to RAM
- lower 32k RAM mappable from all of the 512k fast RAM
- Improved Video output:
- Hires graphics mode (using a configuration register)
- modifyable character set
- 40/80 column display switchable
- 25/50 rows display switch
- multiple video pages mappable to $8000 video mem address
Have fun!
André