• Please review our updated Terms and Rules here
  • Exhibitor application for VCF West 2022 is now open! If you are interested in exhibiting, please fill out the form here.
  • Here are the results of the VCF East 2022 Post Event Survey: Survey Results

Logitech Bus Interface Card

krebizfan

Veteran Member
Joined
May 23, 2009
Messages
5,338
Location
Connecticut
Have you cleaned both mice? Just making sure since that is the most common cause of this problem.

If the pinout information I have is correct, the horizontal movement information is conducted through the lower left pin and the pin at the right of the middle row of the connector. It is possible that is wrong so check if any other pins are loose or broken. And follow the traces from the connector to the central chip to make sure the trace isn't broken.

I couldn't see the picture so I am hoping it is similar to the bus card I have.
 
Top