MauriceH
Experienced Member
Have an M8059 (128K) and want to add to my PDP1123.
Basic jumepring is OK, now the adres jumpering.
PDP1123 config at the moment.
M8186 M8047
M8029 M8047
------- -------
------- -------
Is has a q/q base of 4 rows.
M8047 have both 16K, so add up 32K.
2e M8047 has start adres 100 0000 so think the M8059 should start at 200 0000
The PSA then should be 32k 200 0000 , Y to U ?
FAR I think 128 - 252 so L to K ?
That is if FAR is 32k
Can't figure out the math PSA = MSA - FAR
MSA is that at the moment 32K or 32k + 128k = 160K?
PSA = MSA - FAR => PSA = 160 - 128 => 32K
I did L to K & Y to U but the MEM is not available.
XXDP starts at SM telling 28kW MEM
But f.i.
ODT: 3101245 works to add in a oct.
Thanks for the help
Maurice
(previuos Threat I wanted to start is not visable)
Basic jumepring is OK, now the adres jumpering.
PDP1123 config at the moment.
M8186 M8047
M8029 M8047
------- -------
------- -------
Is has a q/q base of 4 rows.
M8047 have both 16K, so add up 32K.
2e M8047 has start adres 100 0000 so think the M8059 should start at 200 0000
The PSA then should be 32k 200 0000 , Y to U ?
FAR I think 128 - 252 so L to K ?
That is if FAR is 32k
Can't figure out the math PSA = MSA - FAR
MSA is that at the moment 32K or 32k + 128k = 160K?
PSA = MSA - FAR => PSA = 160 - 128 => 32K
I did L to K & Y to U but the MEM is not available.
XXDP starts at SM telling 28kW MEM
But f.i.
ODT: 3101245 works to add in a oct.
Thanks for the help
Maurice
(previuos Threat I wanted to start is not visable)