wowbobwow
Experienced Member
As mentioned in a previous thread, I'm working to get my three Osborne 1's up and running. All three power on currently, but one of them (the one with the oddball "MICRO CZEK" ROM noted in my previous thread) is now being super weird:
Thanks for any guidance or suggestions here, I'm stumped!
Huxley
- If I power it up while a keyboard is connected, the machine just resets itself continuously
- If I power it up with no keyboard connected, it behaves normally (but of course I can't hit RETURN to actually boot without a keyboard plugged in)
- If I power it up with a keyboard connected and it goes into the endless-reboot-cycle, sometimes when I mash down on the keyboard it'll stop resetting and either freeze, or boot long enough for the CP/M prompt to appear, at which point the screen fills with garbage characters
Thanks for any guidance or suggestions here, I'm stumped!
Huxley