jonnymacuser
Experienced Member
Anybody have any tips/suggestions for making a 5.25" floppy disk of the 01MAINT.IMD in order to boot this on an XT?
When I run:
C:\...IMDU 01MAINT.IMD
I get:
IMageDisk Utility 1.16
IMD 1.17: 24/05/2008 10:10:06
PCIX Maintenance diskette
Use for install also
0/0 250 kbps DD 9x512
80 tracks (40/40), 720 sectors (359 data, 361 compressed, 0 unavail)
Then my settings in IMD are:
Drive : A
Cylinders : 40
Sides : Two
Double-step : Off
R/W gap : Calculated
Format gap : Calculated
Format fill : E5
Full Analysis : No
Interleave : As read
Retries : 5
500 kbps -> : 500 kbps
300 kbps -> : 300 kbps
250 kbps -> : 250 kbps
When I boot from the 5.25" floppy -- my 5151 display flashes then displays a blinking cursor that can be moved by the keyboard ... typing the "ls" command does something (floppy light starts blinking) ... but nothing on the screen ...
When I run:
C:\...IMDU 01MAINT.IMD
I get:
IMageDisk Utility 1.16
IMD 1.17: 24/05/2008 10:10:06
PCIX Maintenance diskette
Use for install also
0/0 250 kbps DD 9x512
80 tracks (40/40), 720 sectors (359 data, 361 compressed, 0 unavail)
Then my settings in IMD are:
Drive : A
Cylinders : 40
Sides : Two
Double-step : Off
R/W gap : Calculated
Format gap : Calculated
Format fill : E5
Full Analysis : No
Interleave : As read
Retries : 5
500 kbps -> : 500 kbps
300 kbps -> : 300 kbps
250 kbps -> : 250 kbps
When I boot from the 5.25" floppy -- my 5151 display flashes then displays a blinking cursor that can be moved by the keyboard ... typing the "ls" command does something (floppy light starts blinking) ... but nothing on the screen ...