Vlad
Moderator
It's no secret that my Power Mac G3 All-In-One's CRT almost exploded. But thats a story for another day. I got a Desktop version of the Power Mac G3 from a friend. Since the Motherboards are the same for all of the Beige G3's be it mini tower, to desktop and even the AIO. I booted it in original configuration and it went into OS 9.1. I swapped the HD's and it tries to boot my HD into OS 9.2, but it stops at one puzzle peice at the bottom. (If you know Mac, you understand that) and shows a dialog box that's blank. Then haults with that on the screen. THe motherboard from the AIO is fine, so If I need to swap the mobos, thats fine. But I wold still like to save this one for a project...... Any ideas?
Before you say anything, yes, I reset and removed and reinserted the PRAM battery. Duh, thats like the first step to anything......
-V
This is a little new for the Mac forums. It's more or less a hardware problem......
Before you say anything, yes, I reset and removed and reinserted the PRAM battery. Duh, thats like the first step to anything......
-V
This is a little new for the Mac forums. It's more or less a hardware problem......