• Please review our updated Terms and Rules here

The original Intellivision computer

CP/M User

Veteran Member
Joined
May 2, 2003
Messages
2,986
Location
Back of Burke (Guday!), Australia
"carlsson" wrote:

> I can't remember if you can draw ellipses
> with the CIRCLE command too, but if it
> doesn't, one would have to implement the
> own routine like you did. However, the
> DRAW command on Spectrum Basic has
> a third parameter to bend the line which
> also may be something unique. It is quite
> possible to draw a "flower" using only one
> or two DRAW commands.

Well the CPC has a third paramater in it's
DRAW command, but it's certainally not for
drawning bends in a line. The CPC can pretty
much do this with an extra paramater! :)

Cheers,
CP/M User.
 
Top