jodyspencer
Member
Hello .. I have a NEC D5126 HD that my IBM 5160 with a XEBEC MFM controller would not recognize under FDISK,, so I did a low level format .. then it was recognized with FDISK. but using FDISK it takes forever then it says no room for partition ... ?
I used: Debug- enter
-a 100
mov ax,705
mov cx,1
mov dx,80
int 13
int3
g=100
took about 10-15min
Then I do
Fdisk /mbr
Then fdisk
It ask me create a dos partition (1)
which I do
but it never asked my what size
it just starts the fdisk which takes 2 hrs then says no room for a dos partition
Any help would be appreciated ... Mike
I used: Debug- enter
-a 100
mov ax,705
mov cx,1
mov dx,80
int 13
int3
g=100
took about 10-15min
Then I do
Fdisk /mbr
Then fdisk
It ask me create a dos partition (1)
which I do
but it never asked my what size
it just starts the fdisk which takes 2 hrs then says no room for a dos partition
Any help would be appreciated ... Mike
Last edited: