• Please review our updated Terms and Rules here

unknown system part PCB containing 16 of MM1702AQ Eproms

inotarobot

Veteran Member
Joined
Feb 7, 2014
Messages
1,090
Location
Melbourne, Australia
Help identifying this "Lotseite" MM1702AQ Eprom pcb please

don't know what it's from or where I got. It has name (Lotseite) with 2 dots above the o.

Anyone any ideas?

looking at the labels the 16 chips seem spread into 8 low and 8 high as per the following table

address 002 being 0-R and 0-L
address 100 being 1-R and & ?1-L
address 200 being 2-R and 2-L
address 300 being 3-R and 3-L
address 400 being 4-R and 4-L
address 500 being 5-R and 5-L
address 620 being 6-R and -L
address 700 being 7-R and 7-L

and there is one chip thats out of place and reversed in what I assume is 1-L location being marked
address A00 being 8-L

So I am taking it there was more memory chips on the part of the board thats been cut of and lost.


On the back side are row A,B,C & D and column 6,7,8 & 9 marks

anyways at the moment this is the only PCB I can locate with early eproms that may ??? have some O/S as has been being recently asked for on this forum


So if any of you think these eproms might yield worthwhile code then I will need to try and get a way to read them



0fsi7WH.jpg


HkxD2wk.jpg


kJlQlAP.jpg
 
My guess would be a German company (with the umlauts).

I searched for "Loetseite" (replace the umlauted "o" with "oe") and the most hits that came up appeared to be a PLC manufacturer.

However, the German English translation is "solder side" :)!

Photograph?

Dave
 
Back
Top