oldschoolPS2fan
Member
- Joined
- Jul 10, 2022
- Messages
- 17
Looking to purchase a floppy bezel for IBM PS/2 Model 90 (8595) server/tower. Can't seem to locate this elusive piece of plastic.
I would gladly relieve you of your Model 60 floppy bezel (I have that project ongoing as well as one can never seem to have too many 30+ year old PS/2's ;-), but I believe the Model 60 bezels are about 4.5" (give or take) and the Model 90 is a bit wider at about 5 3/4" or so. Regardless, I can put it to good use if you are looking/willing to part with it.I have a model 60 chassis that I believe is the same bezel. I'll grab it out this evening and pull it off, take some pictures.
Looking forward to seeing what you have.I'm headed home in a few ill grab it out when I get there. I also have the power supply if interested, as well as the feet for the chassis. After I get rid of the bezel, makes the case kinda useless LOL.
Entire front bezel looks great. Now if I could only figure out how to direct message/DM you for details ;-)Here's pics of most the chassis, I'll dig out the side panel and power supply tomorrow. I also have the brackets for the .1GB hard drives, and some other odds and ends... Inside of the chassis was coated with a thin layer of primer due to the mouse damage. I cleaned everything I could and threw a really light coat just to protect it from corroding further. Would come off with a pressure washer, but you dont see any it from the outside, and I went around any stickers...
Ah, that makes sense. I think I have a few more to go. Thanks for letting me know, Alex.