TomL_12953
Experienced Member
I'm using an XT-CF-Lite v4 on an original IBM PC (5150). I discovered that running IBM BASICA would cause a total disruption of access to the CF card until a reboot.
I then flashed the card with the latest BIOS and now the CF card isn't detected at all! I use the Auto adjust settings and all parameters look reasonable.
Can anyone help? I've tried all the settings I can think of!
In possibly unrelated news....I notice a silk-screened marking for R5, a 10k resistor, that has no resistor soldered in. Is that an optional part? The board seemed to work fine before I reflashed (other than the BASICA problem, of course).
Tom L
I then flashed the card with the latest BIOS and now the CF card isn't detected at all! I use the Auto adjust settings and all parameters look reasonable.
Can anyone help? I've tried all the settings I can think of!
In possibly unrelated news....I notice a silk-screened marking for R5, a 10k resistor, that has no resistor soldered in. Is that an optional part? The board seemed to work fine before I reflashed (other than the BASICA problem, of course).
Tom L