jeff0172
Experienced Member
looking to sell this orginal zenith/heath software and manuals 25.00+shipping via media mail for all of it
Last edited:
- VCF East 2023 - April 14-16 - InfoAge Science and History Museums, Wall, NJ
- VCF Southwest 2023 - August 11 - 13 (Tenative dates). More info to come
- VCF Midwest 2023 - September 9,10. More info to come
- VCF West 2023 - August 5, 6 (Tentative dates). More info to come
-
Please review our updated Terms and Rules here
-
From now on we will require that a prefix is set for any items in the sales area. We have created regions and locations for this. We also require that you select a delivery option before posting your listing. This will hopefully help us streamline the things that get listed for sales here and help local people better advertise their items, especially for local only sales. New sales rules are also coming, so stay tuned.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
zenith/heathkit z-100 series software and manuals
- Thread starter jeff0172
- Start date
commodorejohn
Veteran Member
Are the disks good? I'd be interested, but I'd have to hold off for a bit.
jeff0172
Experienced Member
Are the disks good? I'd be interested, but I'd have to hold off for a bit.
yes last time checked they all worked
mgarlanger
Experienced Member
Are these for the Z-100 Series or Z-100 PC Series? It's a little hard to see in the picture, but it appears to say Z-100 PC Series. The Z-100 was Heath/Zenith's original 16-bit computer that had both a 8086 and 8085 and could run 8-bit and 16-bit software, including MS-DOS but was not 100% PC compatible. The Z-100 PC series were 100% PC compatibles and did not run any 8-bit software.
jeff0172
Experienced Member
Are these for the Z-100 Series or Z-100 PC Series? It's a little hard to see in the picture, but it appears to say Z-100 PC Series. The Z-100 was Heath/Zenith's original 16-bit computer that had both a 8086 and 8085 and could run 8-bit and 16-bit software, including MS-DOS but was not 100% PC compatible. The Z-100 PC series were 100% PC compatibles and did not run any 8-bit software.
It says z-100 pc series
commodorejohn
Veteran Member
Ah. Won't do me any good, then.
jeff0172
Experienced Member
ok is there any parts you need? i have basicly every part for the z-148/h-148Ah. Won't do me any good, then.
commodorejohn
Veteran Member
The only Zenith I have is a Z-120 (original model) - I don't know enough about the general Zenith catalogue to have any idea if the Z-148 used compatible parts. (Was it even S-100, or did they move to ISA when they went PC-compatible?) The only thing I'm really missing is a hard drive/controller.
mgarlanger
Experienced Member
The only Zenith I have is a Z-120 (original model) - I don't know enough about the general Zenith catalogue to have any idea if the Z-148 used compatible parts. (Was it even S-100, or did they move to ISA when they went PC-compatible?) The only thing I'm really missing is a hard drive/controller.
The Z-148 is ISA, 100% PC Compatible.
commodorejohn
Veteran Member
Yeah, that's not going to help me, then.