BitWiz
Experienced Member
Now that my PDP-8/E is up and running. I am clearing out some of the boards that I do not need (or might not need)
Here is a list of what I have for trade:
Also, I have the following boards for trade that I will never use if you know anyone who might trade PDP-8 stuff for PDP-11 stuff.
M7847 Unibus 16K X 18 Bit
M7891 Unibus 128K X 18 Bit
M7819 Unibus 8 Port EIA Serial Board
I also have the following PDP-8/A boards that I might be convinced to trade
M8316 DKC8AA PDP-8/A I/O serial/parallel/clock (hex wide)
M8317YB KM08AC PDP-8/A Memory extender, bootstrap, powerfail (hex wide)
Here is a list of what I am looking for (some is unrealistic but I'm listing everything in the off chance something is looking for a good loving home ).
More memory (core or semiconductor)
M8340 EAE Board 1
M8341 EAE Board 2
M868 TD8E DECTape Control
M8357 RX01 Controller
Additional Hardware I would like to add. Most of this is just a dream because of lack of availability of the hardware and my limited budget.
TU56 Dual DECTape Drive (I may have a source for this)
RK05 Disk Drives and packs
RX01/02 Dual Disk Drive
TC08 DECTape Controller (I may have a source for this)
H960 Rack Cabinet w/PDP-8/E name plate preferably. (I may have a source for this)
Thanks for reading this and a very special thanks to Vince Slyngstrom for his continued help and patience.
Also thanks to Dave Gesswein and Jack Rubin for their help.
Here is a list of what I have for trade:
Also, I have the following boards for trade that I will never use if you know anyone who might trade PDP-8 stuff for PDP-11 stuff.
M7847 Unibus 16K X 18 Bit
M7891 Unibus 128K X 18 Bit
M7819 Unibus 8 Port EIA Serial Board
I also have the following PDP-8/A boards that I might be convinced to trade
M8316 DKC8AA PDP-8/A I/O serial/parallel/clock (hex wide)
M8317YB KM08AC PDP-8/A Memory extender, bootstrap, powerfail (hex wide)
Here is a list of what I am looking for (some is unrealistic but I'm listing everything in the off chance something is looking for a good loving home ).
More memory (core or semiconductor)
M8340 EAE Board 1
M8341 EAE Board 2
M868 TD8E DECTape Control
M8357 RX01 Controller
Additional Hardware I would like to add. Most of this is just a dream because of lack of availability of the hardware and my limited budget.
TU56 Dual DECTape Drive (I may have a source for this)
RK05 Disk Drives and packs
RX01/02 Dual Disk Drive
TC08 DECTape Controller (I may have a source for this)
H960 Rack Cabinet w/PDP-8/E name plate preferably. (I may have a source for this)
Thanks for reading this and a very special thanks to Vince Slyngstrom for his continued help and patience.
Also thanks to Dave Gesswein and Jack Rubin for their help.