Length screws disk mounting plate.

[Robin4]

Set of 4 M3 Metric Screws for Mounting Disk Drives - IEC

Set of 4 M3 Metric Screws for Mounting Disk Drives

iec.net

Does anybody know the actual length of these disk drive mounting plate screws?

Iam trying to get these screws, but cant order them from IEC because i dont have a creditcard.

Is it possible to get them on ebay? Can anybody provide me a URL where i can find them.. Thank you.

The plates i have already ordered them, but have to see if they will arrive or not. (taking a gamble)

Mounting bracket here:

Dual Drive Mounting Bracket for Systems Designed for 1 Full Height 5.25 inch Drive - IEC

Dual Drive Mounting Bracket for Systems Designed for 1 Full Height 5.25 inch Drive

iec.net

 

[Robin4]

can be in inches, so i do the translation myself.

 

[DDS]

The threads in most (all?) full height 5.25" floppy drives are SAE #6-32. The length is 3/8"most of the time.

YMMV.

 

[Chuck(G)]

1/4"/ 6mm or or 3/8"/8mm should work for most drives. e.g. here
If 6-32, these should work

FH 5.25" floppies, as mentioned, were generally 6-32 thread; half-height could be either, but usually M3.

 

[Robin4]

I have to see what is can do with these answers. Because i was looking more for countersink screws. The heads needs to be probably been flush with these installation brackets.

But i have to see first.

 

[Chuck(G)]

I passed over the listings for "flathead" screws, but you can easily find them. for example