• Please review our updated Terms and Rules here

Working on my PS2 to Parallel keyboard, I need a little ARM help.

Dwight Elvey

Veteran Member
Joined
Jun 21, 2003
Messages
4,781
Location
Santa Cruz
I've got the STMF103 code working well but now I'm trying to document. I wrote some hand generated assembly code but lost my notes ( scribbled on a piece of paper that likely made it to the recycle bin ). I have two instructions that I'm not sure what they are. I was hoping someone might be able to disassemble them for me.
It was easier to look at the spec and create the binary than to go backwards from the binary to the operation :(

1.
In byte order: FF, D0, F7, FF
in machine order: FFF7D0FF
2.
In byte order: FF, C9, F7, FF
In machine order: FFF7C9FF

Dwight
 

Dwight Elvey

Veteran Member
Joined
Jun 21, 2003
Messages
4,781
Location
Santa Cruz
Are these Thumb instructions?

Yes, Thumb instruction set but I think these are part of the original ARM. Most Thumb, only, are only 16 bits.
At first I thought these were like BX but they are something different. There don't seem to be a lot of disassemblers ( free ) on the web for these processors. If I look through the possible ones, maybe I'll figure it out. I'm pissed that I didn't make some notes on the computer! I suspect, at the time, I'd thought the usage was so obvious that I'd just know what it was.
Dwight
 
Top