Hi,Probably the pico designer for the xta to SD card has give up.
Can you show some more details of your PicoMEM ?
One file per sector ? This is strange a single .IMG file is more simpleThe sectors are stored as files on the SD-Card, that was the easiest way to design. That has the restriction, that data exchange with the SD-Card has to be done
with a FDD or a xt-ide card, like with the good old HDD.
Thank you Alex, but the youtube video is on euro pc 2, i also tried it with an euro pc 1 and an euro xt with no success.Welcome to the forum @jimy79 !
The EuroPC is a bit of an oddity, design-wise, so I'm not sure if the EuroPC 2 is similar.
- Alex
I have a very few plug and play PS2XT2SD cards included SD-Card for IBM PS/2 PS/1 to give away for 75 € plus shipping.
This card adapted a HDD and has the same function, any of the HDD type of the IBM BIOS can be chosen. Maximum is type 09 with 112 MB.
The image is stored in a file system on the SD-Card, data exchange has to be done with floppy or XT-IDE card.
I’ve received my PS2XT2SD and installed in my PS/1 2011 that came with a type 35 WDL-330P, which still works well.
Purchased from whom? Searching for XTA2SD just circles back to this thread.I'd purchased an additional XTA2SD board late last year, but only just recently got it installed in a Tandy 1000 RL.
Sorry, I should have clarified. Purchased from "CallinElvis," via DM correspondence.Purchased from whom? Searching for XTA2SD just circles back to this thread.
you can email me, look at the picture above...I too have been trying to find out how to buy two of these, either completed or PCB with no luck.
Seeing the above post I tried to DM CallinEllis but I can't without posting 10 times?! I can't find an email address either.
I'm not going to spam 9 times to get this done, so how???